Configuration Guide ND Snooping Configuration
Gi0/1 Y N
For example: display ND Snooping interface configurations
Ruijie# show ipv6 nd snooping interface
Interface Trusted Combine-security
--------- ------- ----------------
Gi0/1 Y N
Configuration Example
Networking Requirements
The user uses stateless auto-configuration to assign IPv6 addresses, and now intends to deploy IPv6
ND Snooping to realize the following objectives:
ND routing information attack protection
Network Topology
The network adopts stateless address auto-configuration to configure the IPv6 address of interface.
The FA 0/1 interface of Switch is linked to router.
Host A is linked to FA 0/2 interface of Switch (VLAN1).
Host B is linked to FA 0/3 interface of Switch (VLAN2).
Host C is linked to FA 0/4 interface of Switch (VLAN3).
To Next Page
Loading...
