It prompts that “％ERROR: Attempt to exceed limit of 500 trusted
hosts.”to inform the administrator of the full trusted host table.
If the IP address for the trusted host entry is the same to the one
existing in the untrusted host list, the system will auto-delete the
entry according to the IP address.
It prompts that “％ERROR:Failed to delete trusted host 1.1.1.0
255.255.255.0.” to inform the administrator of the failure of
trusted host removal.
It prompts that “％ERROR:Failed to add trusted host 1.1.1.0
255.255.255.0.” to inform the administrator of the failure of
adding the trusted host.
It prompts that “％ERROR:Failed to add trusted host 1.1.1.0
255.255.255.0.” to inform the administrator of the failure of
adding the trusted host.
It prompts that “％ERROR:Failed to add trusted host 1.1.1.0
255.255.255.0.” to inform the administrator of the failure of
adding the trusted host.
It prompts that “％ERROR:Trusted host 1.1.1.0 255.255.255.0 has
already been configured.” to inform the administrator of the
exisitence of the trusted host to be added.
It prompts that “％ERROR:Trusted host 1.1.1.0 255.255.255.0 is
not found.” to inform the administrator of the inexisitence of the
trusted host to be deleted.
It prompts that “％ERROR:Trusted host 1.1.1.0 255.255.255.0 is
not found.” to inform the administrator if it fails to allocate the
memory for the trusted host.
Clearing the monitored hosts
The isolated hosts can be recovered automatically after a period of the time.
The administrator can use the following command to clear the isolated hosts
manually.
To Next Page
Loading...
