Ruijie RG-S2900G-E Series - Page 710

Configuration Guide NFPP Configuration
Note
Field
Description
Interface
Global refers to the global configuration.
Status
Enable/disable the arp-guard.
Rate-limit
In the format of source IP address-based
rate-limit threshold / source MAC
address-based rate-limit threshold /
port-based rate-limit threshold.
Attack-threshold
In the same format of the Rate-limit.
-
No configuration.
Showing monitored host configuration
Command
Function
Ruijie# show nfpp ip-guard hosts
statistics
Show the ip-guard hosts statistics,
including total host amount, isolated
host amount and non-isolated host
amount.
Ruijie#show nfpp ip-guard hosts [vlan
vid] [interface interface-id] [ip-address |
mac-address]
Show the isolated hosts information.
show nfpp ip-guard hosts vlan vid:
Show the isolated hosts in a VLAN.
show nfpp ip-guard hosts [vlan vid]
[interface interface-id]: Show the
isolated hosts on a interface in a VLAN.
show nfpp ip-guard hosts [vlan vid]
[interface interface-id] [ip-address |
mac-address]: Show the isolated
hosts. Use the IP address or the MAC
address to identify the hosts.
For example,
Ruijie#show nfpp ip-guard hosts statistics
success fail total
------- ---- -----
100 20 120
Ruijie# show nfpp ip-guard hosts
If column 1 shows '*', it means "hardware do not isolate user" .
VLAN interface IP address MAC address remain-time(s)
---- -------- --------- ----------- -------------