Ruijie RG-S2900G-E Series - Page 744

Configuration Guide NFPP Configuration
Command
Function
Ruijie#show nfpp dhcpv6-guard
hosts [vlan vid] [interface
interface-id] [mac-address]
Show the isolated hosts information.
show nfpp dhcpv6-guard hosts vlan vid:
Show the isolated hosts in a VLAN.
show nfpp dhcpv6-guard hosts [vlan vid]
[interface interface-id]: Show the isolated
hosts on a interface in a VLAN.
show nfpp dhcpv6-guard hosts [vlan vid]
[interface interface-id] [mac-address]:
Show the isolated hosts. Use the MAC
address to identify the hosts.
For example,
Ruijie#show nfpp dhcpv6-guard hosts statistics
success fail total
------- ---- -----
100 20 120
Ruijie# show nfpp dhcpv6-guard hosts
If column 1 shows '*', it means "hardware do not isolate user" .
VLAN interface MAC address remain-time(s)
---- -------- ----------- -------------
*1 Gi0/1 0000.0000.0001 110
2 Gi0/2 0000.0000.2222 61
Total：2 host(s)
Ruijie# show nfpp dhcpv6-guard hosts vlan 1 interface g 0/1 0000.0000.0001
If column 1 shows '*', it means "hardware failed to isolate host".
VLAN interface MAC address remain-time(s)
---- -------- ----------- -------------
*1 Gi0/1 0000.0000.0001 110
Total：1 host(s)