Configuration Guide SEM Configuration
Ruijie(SEM-applet)# action label syslog
[priority priority-level] msg msg-text
facility string
Every action corresponds to an action
command. Here we take Syslog action as
an example and introduce the steps to
configure an action. Please refer to "SEM
Command Reference" for information about
other commands.
To delete the policy, execute "no action label" command in the SEM configuration mode.
Configuration example:
# Configure a syslog action named "action_a" for a policy named "policy_a" to send the
log of "action running", with priority level being 6.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# smart manager applet policy_a
Ruijie(SEM-applet)# action label syslog priority 6 msg "action running"
If policy configurations are submitted without configuring action. the
policy can still be registered but it will do nothing when triggered.
You can configure multiple actions for one policy. When the policy is
triggered, the actions will be executed according to the alphabetical
order of action's "label" parameter.
Enter privileged EXEC mode
Ruijie# configure terminal
Enter global configuration mode
Ruijie(config)# smart manager applet
applet-name [class class-options]
Enter SEM configuration mode.
applet-name is the specified policy name.
class parameter specifies the policy
class.
Ruijie(SEM-applet)# description string
Configure descriptive information
To delete policy description, execute "no description" command in the SEM
configuration mode.
Configuration example:
# Configure the descriptive information for a policy named "policy_a", with content being
"policy_for_test".
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# smart manager applet policy_a
To Next Page
Loading...
