Configuration Guide SEM Configuration
Ruijie(SEM-applet)# action action_2 cli command "copy startup-config
tftp://172.16.0.2/device_a/conf_$_event_pub_time"
Ruijie(SEM-applet)# action action_3 exit 1
Ruijie(SEM-applet)# commit
Ruijie(SEM-applet)# exit
Ruijie(config)#
Verification
Ruijie# show smart manager policy registered
No. Class Event Type Time Registered Name
1 applet cli Mon Mar 8 19:30:00 2010 policy_a
event_1: cli: pattern “copy running-config startup-config” sync yes
maxrun 20.000
action action_1 cli command "enable"
action action_2 cli command "copy startup-config
tftp://172.16.0.2/device_a/conf_$_event_pub_time"
action action_3 exit 1
SEM detection of SNMP event
Networking requirements
NetManager is connected with Device A over Ethernet. SNMP service is enabled on
Device A so that NetManager can manage Device A through network. The SNMP
operation of value of "get OID 1.3.6.1.2.1.2.1" must be stopped for purpose of
compatibility.
Network topology
Fig 8 Topology of SNMP event detection
Configuration tips
1) Create policy
2) Configure SNMP event and SNMP Object event
3) Configure action
To Next Page
Loading...
