Configuration Guide Web-based Configuration
To enable the DHCP Snooping function or the source MAC address detection function of
DHCP Snooping, select the related option button and then click Save to validate the
configuration.
2) Setting the DHCP Snooping trust port
Select the trust port to be configured and click Save to validate the configuration. The
configuration information is displayed in the following figure. To delete the trusted port, tick the
check box and click Delete to validate the configuration.
QoS
Classification Setting
Use the Classification Setting menu item to enable the function. The following is the main
page of classification setting.
Figure 1-29 Classification setting
Configuration description:
After setting the classification name and ACL, click Save to validate the configuration. The
configuration information is displayed in the following figure. In order to delete the configured
classification, tick the check box of the classification and click Delete to validate the
configuration.
To Next Page
Loading...
