Configuration Guide Web-based Configuration
Policy Setting
Use the Policy Setting menu item to enable the function.
Policy setting page
Figure 1-30 Policy setting
Configuration description:
Policy name: Configure the policy name.
Classification list: This item lists the classification name that is already set. If the list is null, no
classification is set. Go to the classification setting page to set the classification.
Bandwidth: Enter the bandwidth value in the specified range.
Burst traffic: Enter a value in the specified range depending on the prompt in the page.
When the bandwidth is beyond the specified range, if the DSCP priority is specified, enter a
number in the specified range.
After the parameters are configured, click Save to validate the configuration.
To Next Page
Loading...
