PDG-DHT8000L Expand Serial Command Functional Specifications
16/101
CF_CCAPTIONDISP_%1[CR] Set channel of Closed caption
CF_CCAPTIONCOLOR_%1[CR]
Set color of Closed caption
CF_FRAMELOCK_%1[CR] Set Frame lock function
CF_FRAMELOCKADJ_%1[CR]
Set frame lock frequency
CF_FRAMELOCKRST_%1[CR]
Reset Frame lock setting
5.7 Other Command Table
Execute command Item
CF_KEYEMU_%1[CR]
Control RC/Panel key operation of
Pointer(Right/Left/Top/Bottom)/SELECT/AUTO PC
CF_MENU_%1[CR] Set ON/OFF of Menu
CF_POWER_%1[CR] Set ON/OFF of Power
CF_FREEZE_%1[CR] Set ON/OFF of Freeze
CF_VMUTE_%1[CR] Control Open/Close of Shutter
6． Status Read Command Table
6.1 Image Status Read Command Table
Status read command Item
CR_CONT [CR] Get value of Contrast
CR_BRIGHT [CR] Get value of Brightness
CR_COLOR [CR] Get value of Color
CR_TINT [CR] Get value of Tint
CR_APCTRL Get setting status of Auto Picture Control
CR_COLTEMP Get value of Color temperature
CR_WBAL-R [CR] Get Red value of White Balance
CR_WBAL-G [CR] Get Green value of White Balance
CR_WBAL-B [CR] Get Blue value of White Balance
CR_OFFSET-R [CR] Get Offset Red
CR_OFFSET-G [CR] Get Offset Green
CR_OFFSET-B [CR] Get Offset Blue
CR_SHARP [CR] Get value of Sharpness
CR_GAMMA [CR] Get value of Gamma
CR_NZRED [CR] Get setting status of Noise reduction
CR_PROGV [CR] Get setting status of Progressive scan
CR_BCOLOR [CR] Get setting status of BrilliantColor
CR_IMAGE [CR] Get Selected Image status
CR_IMGGMD [CR] Get setting value of Image Gamma
6.2 PC Status Read Command Table
Status read command Item
CR_FSYNC [CR] Get setting value of Fine Sync
CR_TDOTS [CR] Get setting value of Total Dots
CR_CLAMP [CR] Get setting value of Clamp
CR_H-POS [CR] Get setting value of Horizontal Position
CR_V-POS [CR] Get setting value of Vertical Position
CR_DDOTS [CR] Get setting value of Display Dots
CR_DLINE [CR] Get setting value of Display Line
To Next Page
Loading...
