PDG-DHT8000L Expand Serial Command Functional Specifications
33/101
8.7 Screen Control Command
8.7.1 CF_SCREEN Command
Command
“CF_SCREEN_%1” [CR]
Input is
PC signal
“NORMAL” ---------------------- Select Normal mode
“ZOOM” ------------------------- Select Zoom mode
“TRUE” -------------------------- Select True mode
“FULL” --------------------------- Select Full mode
“CUSTOM” ---------------------- Select Custom mode
“DZOOM□UP” ----------------- Expand image size by Digital Zoom
“DZOOM□DN” ---------------- Compress image size by Digital Zoom
“UP” ---- Select screen size with forward switching in possible
range. (Normal → Zoom → True → Full →
Custom → Normal → …)
“DN” -- Select screen size with backward switching in possible
range. (Normal →Custom →Full → True →
Zoom → Normal → …)
Input is
Video signal
“NORMAL” ---------------------- Select Normal mode
“ZOOM” -------------------------- Select Zoom mode
“NATURAL” --------------------- Select Natural wide mode
“FULL” --------------------------- Select Full mode
“CUSTOM” -----------------------Select Custom mode
“UP” ---- Select screen size with forward switching in possible
range. (Normal → Zoom →Natural → Full →
Custom → Normal → …)
“DN” -- Select screen size with backward switching in possible
range. (Normal →Custom →Full → Natural →
Zoom → Normal → …)
%1
Common
in AV/PC
“RST” ---------------------- Reset Screen adjustment
Details
Select screen size. (Valid only when in the normal Power ON status.)
When selected Input does not meet the requirement for the specified %1, return
“101” [CR] and the command is not executed.
Acceptable “000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.7.2 CF_DZCENT Command
Command
“CF_DZCENT_%1” [CR]
%1 “CENT” -------------------- Cancel Digital Zoom (CENT: “CENTER”)
Details
Cancel Digital Zoom mode. (Valid only when in the normal Power ON status and
Input for Computer is selected.)
Acceptable “000” [CR]
Response
Unacceptable
“101” [CR] ----------------- When input is Video
To Next Page
Loading...
