Sanyo PDG-DHT8000L - 8000 Lumens - Setting Command; CF_LANG Command; CF_ MENUPOSITION Command; CF_SIMPLEMENU Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
38/101
8.9 Setting Command
8.9.1 CF_LANG Command
Command “CF_LANG_%1” [CR]
%1
“ENG” --------------------------- Select ENGLISH
“DEU” --------------------------- Select German
“FRA” --------------------------- Select French
“ITA” ----------------------------- Select Italian
“ESP” ---------------------------- Select Spanish
“POR” --------------------------- Select Portuguese
“NED” --------------------------- Select Dutch
“SVE” --------------------------- Select Swedish
“JPN” --------------------------- Select Japanese
“CHI” ---------------------------- Select Chinese
“KOR” --------------------------- Select Korean
“RUS” --------------------------- Select Russian
Details
Select language for OSD. (Valid only when in the normal Power ON status.)
The language set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.2 CF_ MENUPOSITION Command
Command “CF_MENUPOSITION_%1” [CR]
%1
“UP” ----------------------------- Move Menu position to upper side.
“DN” ----------------------------- Move Menu position to lower side.
“LEFT” -------------------------- Move Menu position to left side.
“RIGHT” ------------------------ Move Menu position to right side.
Details
Move Menu position. (Valid only when in the normal Power ON status.)
This function is worked from the first reception of Command.
* When setting beyond the area of movement is carried out, return “101” [CR] and
the command is not executed.
Ex.1) When movement to right side has already reached limit; and "RIGHT" is
received.
Ex.2) When “LEFT”/”UP” is received at the default position.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.3 CF_SIMPLEMENU Command
Command “CF_SIMPLEMENU_%1” [CR]
%1
“ON” ----------------------------- Set Simple menu to On.
“OFF” --------------------------- Set Simple menu to Off.
Details
Select Simple menu. (Valid only when in the normal Power ON status.)
The status set by this command is stored in EEPROM and the setting remains
even after the power is turned to ALL OFF status.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]