Sanyo PDG-DHT8000L - 8000 Lumens - CR_IDSLOT4 Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
75/101
9.7.18 CR_IDSLOT4 Command
Command “CR_IDSLOT4” [CR]
Details
Get ID information on Slot 4.
This command is to recognize the inserted slot board and specify the valid Input
source.
Acceptable “000_%1” [CR]
%1 The same as CR_IDSLOT1
Response
Unacceptable “?” [CR]