Sanyo PDG-DHT8000L - 8000 Lumens - CF_BLENDMENUOFF Command; CF_BLENDMENU Command; CF_COLORMATCHING Command; CF_CMMSXY Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
45/101
8.9.23 CF_BLENDMENUOFF Command
Command “CF_BLENDMENUOFF_%1” [CR]
%1
“SET” ---------------------- Temporarily hide Edge blending menu and edge line
“RST” ---------------------- Display Edge blending menu and edge line
Details
Set Menu off function of Edge blending.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.24 CF_BLENDMENU Command
Command “CF_BLENDMENU_%1” [CR]
%1
“ON” ---------------------- Display Edge blending menu and edge line.
“OFF” --------------------- Set Edge blending menu and edge line undisplayed.
Details
Set Edge blending menu and edge line displayed or undisplayed.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.25 CF_COLORMATCHING Command
Command “CF_COLORMATCHING_%1” [CR]
%1
“ON” ---------------------- Set to On
“OFF” -------------------- Set to Off
Details
Set status of Color matching.(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.26 CF_CMMSXY Command
Command “CF_CMMSXY_%1_%2_%3” [CR]
%1
“RED” ---------------------- Set value of Red
“GREEN” ----------------- Set value of Green
“BLUE” -------------------- Set value of Blue
“WHITE” ------------------ Set value of White
“HALFWHITE” ---------- Set value of Half white
%2 “0000” – “1000” --------- Directly specify “x” value of color of %1
%3 “0000” – “1000” --------- Directly specify “y” value of color of %1
Details
Set “x”,”y” value of Measured of Color matching.
(Available only in the normal Power ON status)
*The selectable colors are different by using color wheel.
For brightness: Red/Green/Blue/Half white/White
For color reproduction: Red/Green/Blue/White
*When transmit the command of the color that is impossible of choice, return “101”
[CR].
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]