Sanyo PDG-DHT8000L - 8000 Lumens - CR_DYNAMICBLACK Command; CR_HDMISETUP Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
94/101
9.10.53 CR_DYNAMICBLACK Command
Command “CR_DYNAMICBLACK” [CR]
Details Get setting status of DynamicBlack
Acceptable “000_%1” [CR]
%1
“OFF” ---------------------- Off is selected
“LOW” --------------------- Low is selected
“HIGH” -------------------- High is selected
Response
Unacceptable “Error Code” [CR]
9.10.54 CR_HDMISETUP Command
Command “CR_HDMISETUP” [CR]
Details Get setting status of HDMI setup
Acceptable “000_%1” [CR]
%1
“NORMAL” ---------------------- Normal is selected
“ENHANCED” ------------------ Enhanced is selected
Response
Unacceptable “Error Code” [CR]