PDG-DHT8000L Expand Serial Command Functional Specifications
20/101
7． Error Code Table
Error Code Contents
?
-When the received data cannot be decoded
-Parameter designation error (wrong digit number, including
invalid value, etc.)
000 Normal reception (This is “Not” error)
101
When the function selected is not available under current
condition.
ex) When receiving signal-related commands while no signal is
entered
102 Specified value is out of range (Not reflected)
103
Command mismatched to Hardware (the command is for
Optional function which is not implemented)
201
Incremented or decremented value or values are beyond upper
or lower limits.
301 Command cannot be executed during capturing display.
402 Command cannot be executed during PIN code operation.
To Next Page
Loading...
