PDG-DHT8000L Expand Serial Command Functional Specifications
19/101
CR_PIPSIZE[CR] Get Menu size of “Picture in Picture”
CR_PIPFRAMELOCK[CR]
Get setting status of Frame lock of “Picture in
Picture”
CR_PIPSTORE[CR] Get stored status of “Picture in Picture”
CR_EDGEBLENDING[CR] Get setting status of Edge blending
CR_BLEND[CR] Get setting status of width of Edge blending
CR_BLENDBLK[CR] Get setting status of Black level of Edge blending
CR_BLENDTESTPAT[CR] Get setting status of Test pattern of Edge blending
CR_COLORMATCHING[CR] Get setting status of Color matching
CR_CMMSXY_%1[CR] Get “x”,”y” value of Measured of Color matching
CR_CMMSL_%1[CR] Get “L” value of Measured of Color matching
CR_CMTGXY_%1[CR] Get “x”,”y” value of Target of Color matching
CR_CMTGG_%1[CR] Get “g” value of Target of Color matching
CR_CMAUTOTESTPAT[CR]
Get setting status of Auto test pattern of Color
matching
CR_CMMSTESTPAT[CR]
Get setting status of test pattern(Measured) of Color
matching
CR_CMTGTESTPAT[CR]
Get setting status of test pattern(Target) of Color
matching
CR_DYNAMICBLACK[CR] Get setting status of DynamicBlack
CR_HDMISETUP[CR] Get setting status of HDMI setup
6.8 Other Status Read Command Table
Status read command Item
CR_STATUS [CR] Get operation state of the projector
CR_SIGNAL [CR] Get status of signal existence
CR_VMUTE [CR] Get setting status of Video mute
CR_FREEZE [CR] Get setting status of Freeze
CR_PTIMER [CR] Get operating status of P-Timer
CR_TEMPWARN [CR]
Get temperature status whether it is close to abnormal
level or not
CR_TEMPFAIL [CR] Get temperature in abnormal temperature status
CR_TEMP[CR] Get current temperature
CR_SERIALNO [CR] Get value of Serial number
CR_SHUTCOND [CR] Get setting status of Shutter
CR_OPTCTRLNO[CR] Get Option control No. of the projector
CR_LENSTYPE[CR] Get Lens type currently installed
CR_COLWHEELTYPE[CR]
Get Color wheel type currently installed
To Next Page
Loading...
