PDG-DHT8000L Expand Serial Command Functional Specifications
71/101
Input is Video
or S-video
“AUTO” ------------------- indicates Auto is selected
“NTSC” ------------------- indicates NTSC is selected
“NTSC443” -------------- indicates NTSC4.43 is selected
“PAL” ---------------------- indicates PAL is selected
“SECAM” ----------------- indicates SECAM is selected
“PAL-M” ------------------- indicates PAL-M is selected
“PAL-N” ------------------- indicates PAL-N is selected
* Selected System is returned, whether or not signal is
coming.
Input is
Dual-SDI
“D-1035I” -------------------- indicates D-1035i is selected
“D-1080I” -------------------- indicates D-1080i is selected
“D-720P” --------------------- indicates D-720p is selected
“D-1080P” ------------------- indicates D-1080p is selected
“D-1080PSF/24” ------- indicates D-1080psf/24 is selected
“D-1080I” ------------------- indicates D-1080i is selected
* Error Code “101” [CR] is returned for no signal
Unacceptable “Error Code” [CR]
9.7.4 CR_ SYSLIST Command
Command
“CR_SYSLIST” [CR]
Details Get possible systems for System list
Acceptable “000_%1_%2_---_%x” [CR]
%1
Error Code “101” is returned for no signal.
Otherwise following values are returned according to Source.
When input is PC-Analog;
“XGA1” --------------------------------- XGA1 is in the list
“1080I” --------------------------------- 1080i is in the list
“1080PSF/24” ------------------------ 1080psf/24 is in the list
“1080PSF/25” ------------------------ 1080psf/25 is in the list
“1080PSF/30” ------------------------ 1080psf/30 is in the list
* Auto, Mode1-10 shall not be returned.
When input is PC-digital or AV-HDCP;
“D-XGA” ------------------------------- D-XGA is in the list
“D-720P” ------------------------------- D720p is in the list
“D-1080PSF/24” --------------------- D1080psf/24 is in the list
“D-1080PSF/25” --------------------- D1080psf/25 is in the list
“D-1080PSF/30” --------------------- D1080psf/30 is in the list
When input is Y,Pb/Cb,Pr/Cr;
All possible systems in Menu, including Auto, are returned;
“AUTO” --------------------------------- Auto is in the list
“1080I” ----------------------------------- 1080i is in the list
“1035I” ----------------------------------- 1035i is in the list
:
“575I” ------------------------------------- 575i is in the list
“480I” ------------------------------------- 480i is in the list
When input is Video or S-video;
All possible systems in Menu, including Auto, are returned;
“AUTO” ----------------------------------- Auto is in the list
“PAL” -------------------------------------- PAL is in the list
“SECAM” --------------------------------- SECAM is in the list
:
“PAL-N” ------------------------------------ PAL-N is in the list
Response
Unacceptable
“Error Code” [CR]
To Next Page
Loading...
