PDG-DHT8000L Expand Serial Command Functional Specifications
89/101
9.10.36 CR_PIPMAININP Command
Command
“CR_PIPMAININP” [CR]
Details Get Input and Source of “Picture in Picture”. (Main picture)
Acceptable “000_%1_%2” [CR]
%1
“1” -------------------- Input1 is selected
“2” -------------------- Input2 is selected
“3” -------------------- Input3 is selected
“4” -------------------- Input4 is selected
%2
“DIGITAL” --------------------- DVI Input is selected
“ANALOG --------------------- ANALOG RGB is selected
“VIDEO” ----------------------- Video Input is selected
“S-VIDEO” -------------------- S-VIDEO Input is selected
“YPBPR” ---------------------- Y/Pb/Pr Input is selected
“SDI1” ------------------------- SDI1 Input is selected
“SDI2”-------------------------- SDI2 Input is selected
“SCART” ---------------------- SCART Input is selected
“HDCP” ----------------------- HDCP Input is selected
“HDMI” ------------------------ HDMI Input is selected
Response
Unacceptable
“Error Code” [CR]
9.10.37 CR_PIPSUBINPU Command
Command
“CR_PIPSUBINP” [CR]
Details Get Input and Source of “Picture in Picture”. (Sub picture)
Acceptable “000_%1_%2” [CR]
%1
“1” -------------------- Input1 is selected
“2” -------------------- Input2 is selected
“3” -------------------- Input3 is selected
“4” -------------------- Input4 is selected
%2
“DIGITAL” --------------------- DVI Input is selected
“ANALOG --------------------- ANALOG RGB is selected
“VIDEO” ----------------------- Video Input is selected
“S-VIDEO” -------------------- S-VIDEO Input is selected
“YPBPR” ---------------------- Y/Pb/Pr Input is selected
“SDI1” ------------------------- SDI1 Input is selected
“SDI2”-------------------------- SDI2 Input is selected
“SCART” ---------------------- SCART Input is selected
“HDCP” ----------------------- HDCP Input is selected
“HDMI” ------------------------ HDMI Input is selected
Response
Unacceptable
“Error Code” [CR]
To Next Page
Loading...
