Sanyo PDG-DHT8000L - 8000 Lumens - CF_CMAUTOTESTPAT Command; CF_CMRST Command; CF_CMSTORE Command; CF_CMMSTESTPAT Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
47/101
8.9.30 CF_CMAUTOTESTPAT Command
Command “CF_CMAUTOTESTPAT_%1” [CR]
%1
“ON” ---------------------- Set to On
“OFF” -------------------- Set to Off
Details
Set Auto test pattern of Color matching.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.31 CF_CMRST Command
Command “CF_CMRST_%1” [CR]
%1
“CMRST” ---------------------- Reset setting of Color matching
“ADCRST” -------------------- Reset setting of Advanced color matching
Details Reset setting of Color matching.(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.32 CF_CMSTORE Command
Command “CF_CMSTORE_%1” [CR]
%1
“CMSTR” ---------------------- Store setting of Color matching
“ADCSTR” -------------------- Store setting of Advanced color matching
Details Store setting of Color matching.(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.33 CF_CMMSTESTPAT Command
Command “CF_CMMSTESTPAT_%1” [CR]
%1
“RED” ---------------------- Display Red
“GREEN” ------------------ Display Green
“BLUE” -------------------- Display Blue
“WHITE” ------------------ Display White
“HALFWHITE” ---------- Display Half white
“OFF” --------------------- Do not show test pattern display
Details
Display Test pattern of Measured of Color matching.
(Available only in the normal Power ON status)
*The selectable colors are different by using Color wheel.
For brightness: Red/Green/Blue/Half white/White
For color reproduction: Red/Green/Blue/White
*When transmit the command of the color that is impossible of choice, return “101”
[CR].
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]