Sanyo PDG-DHT8000L - 8000 Lumens - CR_DELAYCTRL Command; CR_CCAPTIONSIDP Command; CR_CCAPTIONCOLOR Command; CR_FRAMELOCK Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
87/101
9.10.29 CR_DELAYCTRL Command
Command “CR_DELAYCTRL” [CR]
Details Get setting status of Video delay control
Acceptable “000_%1” [CR]
%1
“OFF”---------- Set Video delay control to OFF
“LOW”---------- Set Video delay control to LOW
“MID”------------ Set Video delay control to MID
“HIGH”---------- Set Video delay control to HIGH
Response
Unacceptable “Error Code” [CR]
9.10.30 CR_CCAPTIONSIDP Command
Command “CR_CCAPTIONDISP” [CR]
Details Get selected channel of Closed caption
Acceptable “000_%1” [CR]
%1
“OFF” --------- Off
“CC1” --------- CC1 is selected
“CC2” --------- CC2 is selected
“CC3” --------- CC3 is selected
“CC4” --------- CC4 is selected
Response
Unacceptable “Error Code” [CR]
9.10.31 CR_CCAPTIONCOLOR Command
Command “CR_CCAPTIONCOLOR” [CR]
Details Get selected color of Closed caption
Acceptable “000_%1” [CR]
%1
“COLOR” ------- Color is selected
“WHITE” -------- White is selected
Response
Unacceptable “Error Code” [CR]
9.10.32 CR_FRAMELOCK Command
Command “CR_FRAMELOCK” [CR]
Details Get status of Frame lock setting.
Acceptable “000_%1” [CR]
%1
“AUTO” --- “Auto” is selected
“23.98” --- “Manual, 23.98 Hz.” is selected
“25.00” --- “Manual, 25.00 Hz.” is selected
“29.97” --- “Manual, 29.97 Hz.” is selected
“30.00” --- “Manual, 30.00 Hz.” is selected
“50.00” --- “Manual, 50.00 Hz.” is selected
“59.94” --- “Manual, 59.94 Hz.” is selected
“60.00” --- “Manual, 60.00 Hz.” is selected
“BLANK”---“Manual, ---“ is selected
Response
Unacceptable “Error Code” [CR]