PDG-DHT8000L Expand Serial Command Functional Specifications
17/101
CR_SETPCADJ [CR] Get currently displayed signal
CR_ORGMODE [CR] Get the original signal of the mode adjusted in PC Adj.
CR_PCSTORE [CR] Get Free or Stored status for PC Adj. Mode 1-5
6.3 Video Status Read Command Table
Status read command Item
CR_SERSYS [CR]
Get currently selected signal. In Auto mode, it returns a
result by Auto detection.
6.4 Input Status Read Command Table
Status read command Item
CR_INPUT [CR] Get selected Input
CR_SOURCE [CR] Get selected Source
CR_SYSTEM [CR] Get selected System in Video Input mode
CR_SYSLIST[CR] Get possible system list
CR-MODELIST[CR] Get possible mode list
CR_SRCINP1 [CR] Get selected source for Input 1
CR_SRCINP2 [CR] Get selected source for Input 2
CR_SRCINP3 [CR] Get selected source for Input 3
CR_SRCINP4 [CR] Get selected source for Input 4
CR_HMSLOT [CR] Get the total number of Slots
CR_NMSLOT1 [CR] Get a card name inserted to Slot 1
CR_NMSLOT2 [CR] Get a card name inserted to Slott2
CR_NMSLOT3 [CR] Get a card name inserted to Slot 3
CR_NMSLOT4 [CR] Get a card name inserted to Slot 4
CR_IDSLOT1 [CR] Get ID information of Slot 1
CR_IDSLOT2 [CR] Get ID information of Slot 2
CR_IDSLOT3 [CR] Get ID information of Slot 3
CR_IDSLOT4 [CR] Get ID information of Slot 4
6.5 Screen Status Read Command Table
Status read command Item
CR_SCREEN [CR] Get selected screen size
CR_KYSTNMODE[CR] Get selected Keystone store mode
CR_CEIL[CR] Get selected ON/OFF of Ceiling
CR_REAR[CR] Get selected ON/OFF of Rear
CR_VSCALE[CR] Get setting status of V Scale
CR_VPOS[CR] Get setting status of V Position
CR_HSCALE[CR] Get setting status of H Scale
CR_HPOS[CR] Get setting status of H Position
6.6 Lamp Status Read Command Table
Status read command Item
CR_LAMPREPL [CR] Get information on Lamp replacement time
CR_LAMPMODE [CR] Get selected Lamp mode
CR_AUTOLAMPCONTROL[CR]
Get setting status of dimmer function level.
CR_LAMPSTS [CR] Get Lamp lighting status
To Next Page
Loading...
