Sanyo PDG-DHT8000L - 8000 Lumens - CR_FRAMELOCKADJ Command; CR_PIP Command; CR_PIPMODE Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
88/101
9.10.33 CR_FRAMELOCKADJ Command
Command “CR_FRAMELOCKADJ” [CR]
Details Get manually set value of Frame lock.
Acceptable “000_%1” [CR]
%1 “23.500” - “62.000”
Response
Unacceptable “Error Code” [CR]
9.10.34 CR_PIP Command
Command “CR_PIP” [CR]
Details Get setting status of “Picture in Picture”
Acceptable “000_%1” [CR]
%1
“OFF” -------------------- Off is selected
“USER1” ---------------- User1 is selected
“USER2” ---------------- User 2 is selected
“USER3” ---------------- User3 is selected
“USER4” ---------------- User4 is selected
“USER5” ---------------- User5 is selected
Response
Unacceptable “Error Code” [CR]
9.10.35 CR_PIPMODE Command
Command “CR_PIP” [CR]
Details Get mode of “Picture in Picture”
Acceptable “000_%1” [CR]
%1
“PINP” -------------------- P in P is selected
“PBYP” ---------------- P by P is selected
Response
Unacceptable “Error Code” [CR]