Sanyo PDG-DHT8000L - 8000 Lumens - CR_SRCINP4 Command; CR_HMSLOT Command; CR_NMSLOT1 Command; CR_NMSLOT2 Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
73/101
9.7.9 CR_SRCINP4 Command
Command “CR_SRCINP3” [CR]
Details Get Source of Input 4
Acceptable “000_%1” [CR]
%1 The same data as CF_SRCINP1
Response
Unacceptable “?” [CR]
9.7.10 CR_HMSLOT Command
Command “CR_HMSLOT” [CR]
Details Get the total number of Slots(Inputs)
Acceptable “000_%1” [CR]
%1 “004”
Response
Unacceptable “?” [CR]
9.7.11 CR_NMSLOT1 Command
Command “CR_NMSLOT1” [CR]
Details Get the board name inserted to Slot1
Acceptable “000_%1” [CR]
%1
“RGB-HDMI” -------------------- Input1/ New RGB&HDMI board
“5BNC-VIDEO”------------------ Input2/ New Video board
“HDCP-DVI2” ------------------- New HDCP & DVI Card
“DUAL-SDI” -------------------- HD&SD-SDI board
“NOTERMINAL” --------------- There is no board inserted
Response
Unacceptable “?” [CR]
9.7.12 CR_NMSLOT2 Command
Command “CR_NMSLOT2” [CR]
Details Get the board name inserted to Slot 2
Acceptable “000_%1” [CR]
%1 The same data as CR_NMSLOT1
Response
Unacceptable “?” [CR]
9.7.13 CR_NMSLOT3 Command
Command “CR_NMSLOT3” [CR]
Details Get the board name inserted to Slot 3
Acceptable “000_%1” [CR]
%1 The same data as CR_NMSLOT1
Response
Unacceptable “?” [CR]