Sanyo PDG-DHT8000L - 8000 Lumens - CF_CMTGTESTPAT Command; CF_CMFDEFAULT Command; CF_CMMENUOFF Command; CF_CMMENU Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
48/101
8.9.34 CF_CMTGTESTPAT Command
Command “CF_CMTGTESTPAT_%1” [CR]
%1
“RED” ---------------------- Display Red
“GREEN” ------------------ Display Green
“BLUE” -------------------- Display Blue
“WHITE” ------------------ Display White
“CYAN” -------------------- Display Cyan
“MAGENTA” ------------- Display Magenta
“YELLOW” --------------- Display Yellow
“OFF” --------------------- Do not show test pattern display
Details
Display Test pattern of Target of Color matching.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.35 CF_CMFDEFAULT Command
Command “CF_CMFDEFAULT_%1” [CR]
%1 “RST” ---------------------- Reset the value of Target
Details
Return the value of Advanced color matching to Factory Default status
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.36 CF_CMMENUOFF Command
Command “CF_CMMENUOFF_%1” [CR]
%1
“SET” ---------------------- Temporarily hide Advanced color matching menu
“RST” ---------------------- Display Advanced color matching menu
Details
Set Menu off function of Advanced color matching.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.37 CF_CMMENU Command
Command “CF_CMMENU_%1” [CR]
%1
“ON” ---------------------- Display Advanced color matching menu
“OFF” --------------------- Set Advanced color matching menu undisplayed.
Details
Set Advanced color matching menu displayed or undisplayed.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]