Sanyo PDG-DHT8000L - 8000 Lumens - Setting Status Read Command Table

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
18/101
CR_INFLAMP [CR] Get Lamp switching status
CR_PROJH [CR] Get the projector total running time
CR_HMLAMP [CR] Get the total number of lamps
CR_LAMPH [CR] Get information of actual Lamp running time
CR_LAMPCORRESPH [CR] Get lamp running time multiplied by a coefficient
CR_LAMPINTERVAL [CR] Get Lamp interval status
CR_LAMPLIFECONTROL [CR] Get Lamp life control status
6.7 Setting Status Read Command Table
Status read command Item
CR_LANG [CR] Get selected language
CR_SIMPLEMENU [CR] Get setting status of Simple menu
CR_MENUSIZE [CR] Get setting status of Menu size
CR_DISP [CR] Get setting status of Display
CR_BACKGND [CR] Get setting status of Screen for no signal
CR_LOGO [CR] Get setting status of Logo
CR_LOGOLOCK [CR] Get setting status of Logo Lock
CR_FANSPEED [CR] Get selected Fan Control Speed
CR_RCODE [CR] Get selected Remote Control Code
CR_RSENS [CR]
Get selected location of infrared remote receiver of
remote control
CR_P-MANE [CR] Get setting status of Power management
CR_P-MANETIME [CR] Get setting time for Power Management
CR_ON-STA [CR] Get setting status of ON Start
CR_SECURITY [CR] Get setting status of Security
CR_PJLOCKNOW [CR] Get setting status of current PJ Lock
CR_PJLOCKMENU [CR] Get PJ Lock setting status on the menu
CR_FILH[CR] Get Filter used time
CR_FILCOND[CR] Get status of filter clog
CR_FILREPL[CR] Get status of Filter cleaning / replacement time
CR_FILTIMER[CR]
Get time to display Filter cleaning / replacement
warning on screen
CR_FILREMAIN[CR] Get remaining number of usable Filter scroll
CR_TESTPAT[CR] Get setting status of Test pattern
CR_KEYDIS [CR] Get setting status of RC/KEY control limitation
CR_SHUTRCPROT[CR] Get remote controller disability status of the shutter
CR_SHUTKEYPROT[CR] Get Key controller disability state of the shutter
CR_SHUTH[CR] Get time setting to begin the shutter management
CR_SHUTEFFECT[CR] Get status of shutter effect function
CR_SHUTRELEASE[CR] Get setting status of release key of shutter
CR_DELAYCTRL[CR] Get selected mode of Video delay control
CR_CCAPTIONDISP[CR] Get setting status of channel of Closed caption
CR_CCAPTIONCOLOR[CR] Get setting status of color of Closed caption
CR_FRAMELOCK[CR] Get setting status of Frame lock function
CR_FRAMELOCKADJ[CR] Get value of Frame lock frequency
CR_PIP[CR] Get setting status of “Picture in Picture”
CR_PIPMODE[CR] Get setting status of Mode of “Picture in Picture”
CR_PIPMAININP[CR]
Get setting status of Input / Source of “Picture in
Picture” (Main picture)
CR_PIPSUBINP[CR]
Get setting status of Input / Source of “Picture in
Picture” (Sub picture)