Sanyo PDG-DHT8000L - 8000 Lumens - Setting Status Read Commands; CR_LANG Command; CR_SIMPLEMENU Command; CR_MENUSIZE Command

PDG-DHT8000L Expand Serial Command Functional Specifications
                                       
81/101
9.10 Setting Status Read Commands
9.10.1 CR_LANG Command
Command “CR_LANG” [CR]
Details Get selected language
Acceptable “000_%1” [CR]
%1
“ENG” -------------------------- English is selected
“DEU” -------------------------- German is selected
“FRA” -------------------------- French is selected
“ITA” ---------------------------- Italian is selected
“ESP” -------------------------- Spanish is selected
“POR” -------------------------- Portuguese is selected
“NED” -------------------------- Dutch is selected
“SVE” -------------------------- Swedish is selected
“CHI” --------------------------- Chinese is selected
“KOR” -------------------------- Korean is selected
“JPN” --------------------------- Japanese is selected
“RUS” -------------------------- Russian is selected
Response
Unacceptable “?” [CR]
9.10.2 CR_SIMPLEMENU Command
Command “CR_SIMPLEMENU” [CR]
Details Get setting status of Simple menu
Acceptable “000_%1” [CR]
%1
“ON” -------------------------------- On is selected
“OFF” ------------------------------- Off is selected
Response
Unacceptable “Error Code” [CR]
9.10.3 CR_MENUSIZE Command
Command “CR_MENUSIZE” [CR]
Details Get setting status of Menu size
Acceptable “000_%1” [CR]
%1
“NORMAL” ------------------------ Normal is selected
“DOUBLE” ------------------------ Double is selected
Response
Unacceptable “Error Code” [CR]
9.10.4 CR_DISP Command
Command “CR_DISP” [CR]
Details Get Display setting status
Acceptable “000_%1” [CR]
%1
“ON” -------------------------- Display is set to ON.
“CNTDWNOFF” ------------ Display is set to Count down OFF.
“OFF” ------------------------ Display is set to OFF.
Response
Unacceptable “?” [CR]