Sanyo PDG-DHT8000L - 8000 Lumens - Page 9

PDG-DHT8000L Expand Serial Command Functional Specifications
                  
9/101
9.10.51 CR_CMMSTESTPAT Command .....................................................................93
9.10.52 CR_CMTGTESTPAT Command......................................................................93
9.10.53 CR_DYNAMICBLACK Command...................................................................94
9.10.54 CR_HDMISETUP Command...........................................................................94
9.11 Other Status Read Commands...............................................................................95
9.11.1 CR_STATUS Command.....................................................................................95
9.11.2 CR_SIGNAL Command.....................................................................................95
9.11.3 CR_VMUTE Command......................................................................................95
9.11.4 CR_FREEZE Command ....................................................................................95
9.11.5 CR_P-TIMER Command....................................................................................96
9.11.6 CR_TEMPWARN Command .............................................................................96
9.11.7 CR_TEMPFAIL Command.................................................................................97
9.11.8 CR_TEMP Command.........................................................................................98
9.11.9 CR_SERIALNO Command................................................................................98
9.11.10 CR_SHUTCOND Command............................................................................98
9.11.11 CR_OPTCTRLNO Command ..........................................................................99
9.11.12 CR_LENSTYPE Command .............................................................................99
9.11.13 CR_COLWHEELTYPE Command...................................................................99
10． Command with Address Specification ..................................................................100
10.1. Overview................................................................................................................100
10.2. Functional Execution Command with address .................................................100
10.2.1. Format.................................................................................................................100
10.2.2. When the command pipelining is needed.......................................................101
10.3. Status Read Command with Address.................................................................101
10.3.1. Format.................................................................................................................101