PR 5220 Instrument Manual Commissioning
Sartorius EN-51
4.3.8.2 Weighingpoint ‚xBPI-Scale’
Accept, ResError = reset error, Abort
Accept, ResError = reset error, Abort
- Adjust with user weight
Adjust with user-defined weight
- Adjust with auto weight
Adjust with automatic weight detection
- Adjust with default weight
Adjust with default weight
- Adjust with intern weight
Adjust with internal weight
Accept, ResError = reset error, Abort
Accept = OK, ResError = reset error, Abort = Abbruch
Very stable, stable, unstable, very unstable
Final readout, Filling mode, low filtering, w/o filtering = without filtering
0,25 digit, 0,5 digit, 1 digit, 2 digit, 4 digit, 8 digit
no delay, short delay, average delay, long delay
at any time, not until stable
auto zero on, auto zero off
ext.adj.w.fact.wt., ext.adj.w.user.wt.., ext.adj.w.pres.wt., internal adjust,
ext.lin.w.fact.wt., ext.lin.w.user.wt., confirm preload, delete preload,
1% of max load, 2% of max load, 5% of max load, 10% of max load
2% of max load, 5% of max loadt, 10% of max load, 20% of max load
active, inactive, only for zeroing
normal output, fast output
1 weight unit, 2 weight units, 3 weight units
- Weight unit 2
- Weight unit 3
Gramm [g], Kilogram [kg], Carat [ct], Pound [lb], Unze [oz], Troy unze [ozt],
Tael Hongkong [tlh], Tael Singapur [tls], Tael Taiwan [tlt], Grain [GN],
Pennyweight [dwt], Milligramm [mg], Parts/pound [/lb], Tael china [tlc],
Momme [mom], Karat [k], Tola [tol], Baht [bat], Mesghal [m], Tonne [t]
- Display accuracy 2
all digits, reduced when moved, one level lower, two level lower, three level
lower, 1%, 0.5%, 0.2%, 0.1%, 0.05%, 0.02%, 0.01%, Multi-interval,