Need help?Do you have a question about the Sartorius PR 5610 and is the answer not in the manual?
General| Type | Controller |
|---|---|
| Model | PR 5610 |
| Manufacturer | Sartorius |
| Storage Temperature | -20°C to 70°C |
| Relative Humidity | 10% to 90% (non-condensing) |
| Power Supply | 12 – 30 V DC |
| Load Cell Connection | 6-wire connection |
| Input Sensitivity | 0.5µV/d |
| Accuracy | 0.01% of full scale |
| Digital Interfaces | RS485 |
| Interface | RS485 |
| Humidity | 10% to 90% (non-condensing) |
Details intended use, operational requirements, and initial checks for the instrument.
Covers essential safety measures before operation, including installation and component handling.
Specifies procedures for authorized repairs and necessary precautions for maintenance.
Provides guidance on proper disposal of electronic waste and cleaning the instrument.
Provides an overview of the instrument's features, interfaces, and capabilities.
Details available plug-in cards, memory extensions, and software licenses.
Describes the instrument's housing, dimensions, connections, and front panel controls.
Covers requirements for mounting, housing, and internal hardware layout.
Details the components and connection points on the main circuit board for power and options.
Explains how to connect load cells and cable junction boxes using specific wiring techniques.
Covers RS232, Serial I/O, and Fieldbus interface card installation and configuration.
Explains how configuration and calibration data are stored and protected against power loss.
Describes instrument display, controls, and navigation through the main menu structure.
Covers assigning weighing points and performing internal ADC calibration procedures.
Details MODBUS/J-BUS protocol functions and data exchange for industrial networking.
Specifies technical details of the analog-to-digital converter, including principle and filters.
Lists processor, memory, display, keypad, and power supply technical data.
Details operating conditions, immunity, and interference suppression specifications.
Provides information on construction type, dimensions, connections, accessories, and weight.
Lists available spare parts with their corresponding service codes for ordering.
Defines technical terminology used throughout the installation manual.
To Next Page