Sartorius PR 5610 - Entry of User-Defined Units; Printing All Configuration Data

PR 5610 Installation Manual Commissioning with Terminal
Sartorius 117
5.2.7 Entry of user-defined units
PR1713 Rel. 03.12 20.05.2004 09:05
Configuration Mo 05.July 2004 13:06:16
U Set units
F Set fieldbus configuration
E Exit
Enter new units : u1u2u3u4u5u6u7u8
For use of IEC 61131 firmware functions MAKE_WEIGHT and SET_WEIGHT_UNIT, 8 different units can be
defined. Each unit is composed of 2 characters.
• Press key [U]
• A string (16 characters) of the 8 actual units á 2 characters is displayed:
Enter new units: u1u2u3u4u5u6u7u8
The cursor is behind the 16
th
character.
• Move cursor with arrow keys, delete characters with the backspace key. (line editor).
• Entry of required characters (units).
• Press the Enter key. If the entry is correct, the line is removed from the display. If the entry is faulty,
the following message
(must be 16 characters): lbcmdm and the characters entered so far are
displayed.
5.2.8 Printing all configuration data
All parameters are printed out via the serial port configured for the printer device.