Sartorius PR 5610 - PR 1713;17 6 Opto Inputs; 8 Opto Outputs

Hardware Configuration PR 5610 Installation Manual
52 Sartorius
3.4.10 PR 1713/17 6 Opto inputs / 8 Opto outputs
Max. 3 cards PR 1713/17 can be used. The digital interfaces are passive (external supply is necessary) and have
one common potential per input group and one common potential per output group.
Connecting method: 2-row 25-pin connector
Terminal block A/B with 2x8
screw terminals
Number of inputs / outputs:
Inputs: 6, outputs: 8
Input signal:
Low: 0 ... 4 V or open
High: 10 ... 31 V
External supply required
Input current: < 7 mA at 24 V
< 3 mA at 12 V
Output: Max. switching voltage: 31 V
Max. switching current : 25 mA
Voltage drop at 25 mA: 3 V
External supply required
Potential isolation: Yes, 6 inputs have got 1 common
minus potential, 8 outputs have
got 1 common minus potential
Dimension (LxWxH): 80 x 68 x 15 mm
Weight: 33 grs.
Pin allocation of option connectors in the unit (installation see chapter 3.2.1)
Terminal block B input B1 B2 B3 B4 B5 B6 B7 B8
upper row 6 channels + CH1 + CH2 + CH3 + CH4 + CH5 + CH6 - INP - OUT
Terminal block A output A1 A2 A3 A4 A5 A6 A7 A8
lower row 8 channels + CH1 + CH2 + CH3 + CH4 + CH5 + CH6 + CH7 + CH8