Sartorius PR 5610 - PR 1713;14 Ethernet

Hardware Configuration PR 5610 Installation Manual
48 Sartorius
3.4.8 PR 1713/14 Ethernet
The card is plugged in slot 4 on board 2, (installation see chapter 3.2.2)
Connecting method: 50 pole connector
Terminal block with 5 screw
terminals
Transmission rate:
10 Mbits/sec
Coupling:
Point to point
Cable: Shielded twisted pair
Cable impedance: 150 Ohm
Dimension (LxWxH): 78 x 64 x 20 mm Potential isolation: Yes
Weight: 50 grs. Cable length to HUB: Max. 30 m
3.4.8.1 Connection to a PC (crossover)
Terminal Signal Wire Color Signal RJ 45
Pin 5 n.c.
Pin 4 TPRXn orange TPTXn 2
Pin 3 TPRX white - orange TPTX 1
Pin 2 TPTXn green TPRXn 6
Pin 1 TPTX white - green TPRX 3
3.4.8.2 Connection to a HUB (straight-through)
Terminal Signal Wire Color Signal RJ 45
Pin 5 n.c.
Pin 4 TPRXn green TPTXn 6
Pin 3 TPRX white - green TPTX 3
Pin 2 TPTXn orange TPRXn 2
Pin 1 TPTX white - orange TPRX 1