Safety Hints PR 5610 Installation Manual
8 Sartorius
1.4 Repair and maintenance
Repairs are subject to checking and can be carried out only at Sartorius Hamburg GmbH. In case of defect or
functional trouble, please, contact your local SARTORIUS organization for repair. When returning the instrument
for repair, an exact and complete fault description must be supplied. Maintenance work may be carried out only
by a trained technician aware of the involved hazards, whereby the relevant precautions must be taken.
1.4.1 Soldering work
The Basic unit does not require any soldering work.
Battery activation
The unit is delivered with the battery not connected. The battery must be connected, follow the safety hints. The
jumper for the battery is located on board 2 next to the 4-pole power supply cable.
The jumper must provide the connection between the posts to activate the battery.
After the battery has been activated, the clock (data and time) needs adjustment.
There are different possibilities for monitoring the battery voltage during operation. One is that during startup,
a low-battery sign will be displayed on the weight indicator:
For function and adjustment of the 'Lo Bat' indication, see chapter 4.8.3.3 Low Battery Check.
Battery replacement
The instrument contains a lithium battery for memory back-up (saving the data). When
exceeding the specified minimum battery voltage, or in case of defect, the battery
must be replaced by the SARTORIUS customer service or by an equivalent trained
person and disposed of in accordance with the local regulations.
For battery lifetime see chapter 6.2.1.
To Next Page
Loading...