PR 5610 Installation Manual Commissioning
Sartorius 71
4.4.2 W&M Parameter
For all weighing point types a W
&M parameter can be set individually (see chapter 4.3.1.1).
The parameter can only be set / changed, if the CAL switch is open.
The following selections are possible (the default data are displayed) :
Select W
&M input mode with . The stored value or the default
value is displayed.
For [internal ADC]:
Select W&M mode [OIML], [NTEP] or [NSC] with or ;
confirm with
.
Example for [NSC].
For [xBPI], [liquid], [user] or [GWT-Scale]:
Select
W&M mode [OIML] or [NTEP] with or ;
confirm with
.
Example for [NTEP].
[none]
If the parameter is set to [none] for all assigned weighing points, gross (B), net (N) and tare (T) is displayed with
weight unit on the display.
[OIML]
If a weighing point is set to OIML, the weight values for Diff, Flow, Setp and User are displayed without weight
unit. For further information, refer to the table.
If LEDs for indicating the WP are existent or the parameter is set to [none] for all other weighing points : gross
(B), net (N) and tare (T) are displayed with weight unit .
[NTEP] or [NSC]
If a weighing point is set to NTEP or NSC, the weight values for Diff, Flow, Setp and User are displayed without
weight unit. For further information, refer to the table.
If LEDs for indicating the WP are existent or the parameter is set to [none] for all other weighing points : gross
(G), net (N) and tare (T) are displayed with weight unit .
If the parameter is set to [OIML] or [NTEP] for more than one weighing point and no LEDs for displaying A and
B are existent, gross (B/G), net (N) and tare (T) are displayed without weight unit .
none OIML NTEP NSC
negative weight (<-1/4d) unit no unit unit no unit
weight in range (-1/4d ... FSD) unit unit unit unit
weight > FSD no unit no unit unit no unit
weight > FSD+overload ERROR 2 ERROR 2 ERROR 2 ERROR 2
gross indication B B G G
Diff weight unit no unit no unit no unit
Flow unit no unit no unit no unit
Setp unit no unit no unit no unit
User unit no unit no unit no unit
To Next Page
Loading...