PR 5610 Installation Manual Commissioning
Sartorius 83
4.7 xBPI Scale
The PR 5610 can communicate with a Sartorius scale or platform via the xBPI protocol. The serial interface
option PR 1713/04 has to be installed or the serial port Builtin can be used. For applications written in IEC
61131 an additional set of functions is described in a separate documentation. The communiction with the
Sartorius scale / platform is using the serial interface only (no variables in SPM or digital I/Os).
The weight determination and transmission is strongly dependend on the scale / platform.
Weight values with more than 7 valid digits (6 digits if multirange) cannot be shown.
The FSD values have to be set in the scale or are already preset in case of a platform, FSD cannot be changed via
xBPI protocol.
To Next Page
Loading...