PR 5610 Installation Manual Commissioning
Sartorius 85
4.7.3 xBPI Platform configuration
The XBPI platforms have got so-called specification blocks to select the different operating modes
(Single range, multi range etc.).
Select [Setup].
The PR 5610 is loading the parameters from the Sartorius
platform.
Error message:
No communication with xBPI scale
Select [Select].
Enter numeric value (1 ... 20), if specification block is not
valid, an error message appears.
Select [YES] for saving the data, [NO] for leaving with data
unchanged.
After selecting [YES] the progress of saving data is shown.
Return to next higher level.
For printing the scale parameters press .
To Next Page
Loading...