satmap active 20 - Edit Title; Edit Comments; Reverse Route

Software v3.0.11065
© Satmap Systems Ltd 2017
63
7. MAINMENU:RoutesMenu(...cont)
7.6 EditTitle
(GPS MAP → MAIN MENU → ROUTES MENU →
(folder/route) → Edit → Edit Title)
When a route is created it is called 'My Route 1'
by default (or similar, depending on the number of
existing routes). To rename it, useEditTitle.
Highlight EditTitle, then either press the Editbutton
or centre press the rocker pad to access the keypad
(section 9.00).
7.7 EditComments
(GPS MAP → MAIN MENU → ROUTES MENU →
(folder/route) → Edit → Edit Comments)
Highlight EditComments, then either press the Edit
button or centre press the rocker pad to access the
keypad.
Operate the keypad to input comments describing
the route and press Done when finished. The screen
will return to the ROUTEEDIT screen.
7.8 ReverseRoute
(GPS MAP → MAIN MENU → ROUTES MENU →
(folder/route) → Edit → Reverse Route)
Press Reverse to reverse the route. Press again to
go back to the original direction of travel. There is
an on-screen statement which says either Currently
Forward or CurrentlyReverse
.
Alternative ways to reverse the route are via the
ROUTEPLAN screen or the ROUTECARD screen.
TEXT EDIT
screen
Reverse
Route option
Currently
Reverse
orCurrently
Forward