Software v3.0.11065
© Satmap Systems Ltd 2017
98
17. Accessories
Accessories
The following accessories are available from Satmap. For
a full range, please visit www.satmap.com.
17.1 QuadLockA20CustomBackplate
This Backplate is secured with two 2mm M3 bolts
(supplied, with hex key) and is used for interfacing with all
Quad Lock Mounting systems Once fitted, it provides a
low profile mounting socket does not require removal for
the walking activities.
17.2 QuadLockOutFrontBikeMount.
This is the Satmap recommended Bile Mount for most
types of Handlebar / stem combinations. Specifically
it allows the mount to be reversed over the stem for
maximum unit support, symmetry and minimum height
Suits bars 25.4mm-31.8mm
QuadLockCustomBackplatetted
17.3 QuadLockProBikeMount.
This mount sits slightly higher than the Out Front
mount but offers increased fitting options for stems
and bars between 25-40mm. Quad Lock say "The
Bike Mount can be mounted in seconds using
our quick mount o-rings or, for a more permanent
fixture, the mount can be secured using zip ties.
Light, strong and durable.
17.4 QuadLockVehicleMount.
The Quad Lock Car Mount is one of the
strongest and most stable smart phone mounts
on the market. This mount easily connects and
disconnects to your phone in a matter of seconds
and features a patented cam-locking industrial-
strength suction cup.
17.5 Active20CarryCase
The Carry Case has a padded compartment
for the Active 20, closed with a Velcro top for
fast access, and an elasticated front mesh for
additional storage.
17.6 Lanyard.
The Lanyard is 1.3m long, branded with the
Satmap logo, and is adjustable to fit most
requirements. It has two fittings on each end:
a metal clip for attaching to the D-Rings on the
side of the carry case, or a nylon hoop fitting
for attaching directly onto the shoulders of the
Active 20 itself.
17.7 SpareLiPolPowerPack
For those extra-long duration activities, a
spare LiPol Battery Pack is just the answer.
QuadLockOutFrontBikeMount
QuadLockProBikeMount
QuadLockVehicleMount
Lanyard(Active20/12/10)
CarryCase(Active20)