satmap active 20 - Edit Warning Radius; Edit Visibility; Edit POI Icon; Delete

Software v3.0.11065
© Satmap Systems Ltd 2017
78
11. POIs(PointsofInterest)(...cont)
11.12EditWarningRadius
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Edit Warning Radius)
Select Edit Warning Radius to take you to the
WarningRadiusscreen.Use the rocker pad or the
Next button to scroll through the options. Press
Select to choose a radius at which the unit will
sound warning beeps indicating the vicinity of the
selected POI.
11.13EditVisibility
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Edit Visibility)
On selecting Edit Visibility you are taken to a
menu where you can hide or show your POIs by
setting them as 'visible' or 'not visible' on your map.
Pressing Select takes you back to the edit menu.
Note: This is only respected if the global visibility is set
to 'Default' (GPS MAP → MAIN MENU → OOI Menu
→ 'Visibility - Default').
11.14EditPOIIcon
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Edit POI Icon)
Highlight Edit POI Icon and use the rocker pad
to select a POI icon from the POI IconSelection
screen. Press Done to return to the EDITPOI menu.
Set POI
warning radius
Set visibility
for POIs
11.15Delete
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Delete)
Press Delete or centre press the rocker pad to
access a screen showing the option to delete the
POI. When Delete is selected the screen will go
back to the OOIFolders. Pressing Cancel will take
you back to the EDITPOI menu.
11.16MovetoSDCard
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Move to SD Card)
(Only available if an SD card has been inserted)
. Move
the POI from the SD card to the Internal Storage.
Highlight MovetoSDCard
and either press Move
or centre press the rocker pad. (Subsequently this
option becomes MovefromSDCard). The screen
will go to the OOIFolders and the POI will appear
in the SDCard folder. (To move the POI from the
SD card, select MovefromSDCard from the edit
menu. The POI will then appear in the Internal
Storage folder).
11.17CopytoSDCard
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Copy to SD Card)
(Only available if an SD card has been inserted)
. Make
a copy of the POI onto the SD card. Highlight Copy
toSDCard and either press Copy or centre press
the rocker pad. (Subsequently this option becomes
CopyfromSDCard). The screen will go to the OOI
Folders and a copy of the POI will appear in the
SD
Card folder, as well as in the InternalStorage folder.
Note: Visibility should
be set to 'Default' to be
editable for individual
OOIs.