1
General information
Rights to claim under limited warranty
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
10
1.3 Rights to claim under limited warranty
Read the information in this documentation. This is essential for fault-free operation
and fulfillment of any rights to claim under limited warranty. Read the documentation
before you start working with the product.
1.4 Exclusion of liability
Read the information in this documentation, otherwise safe operation is impossible.
You must comply with the information contained in this documentation to achieve the
specified product characteristics and performance features. SEW‑EURODRIVE as-
sumes no liability for injury to persons or damage to equipment or property resulting
from non-observance of these operating instructions. In such cases,
SEW‑EURODRIVE assumes no liability for defects.
1.5 Other applicable documentation
This document supplements the operating instructions and limits the application notes
according to the following information. Use this document only together with the oper-
ating instructions.
1.6 Additional information
For additional information, refer to the following documentation:
• "MOVIPRO
®
SDC Decentralized Drive and Position Controller" operating instruc-
tions
• "MOVIPRO
®
ADC Decentralized Drive and Application Controller" operating in-
structions
• "MOVITOOLS
®
MotionStudio" manual/online help
• "Application Configurator for CCU" manual
• "MOVI‑PLC
®
Programming in the PLC Editor" system manual
• Manuals for application modules
1.7 Product names and trademarks
The brands and product names in this documentation are trademarks or registered
trademarks of their respective titleholders.
1.8 Copyright notice
©2016SEW‑EURODRIVE. All rights reserved. Unauthorized reproduction, modifica-
tion, distribution or any other use of the whole or any part of this documentation is
strictly prohibited.
16998413/EN – 12/2016
To Next Page
Loading...
