SEW-Eurodrive MOVIPRO Ethernet/IP - 12.2 First steps

12
Operation with the MOVITOOLS
®
MotionStudio engineering software
First steps
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
140
12.2 First steps
12.2.1 Starting the software and creating a project
Proceed as follows:
1. Select the following item from the Windows start menu: [Start] / [Pro-
grams]/[SEW]/[MOVITOOLS MotionStudio]/[MOVITOOLS MotionStudio]
ð MOVITOOLS
®
MotionStudio is started.
2. Create a project with a name and directory.
12.2.2 Establishing communication and scanning the network
Proceed as follows:
1. Click "Configure communication channels"[1] in the toolbar.
[1]
18014399642823819
ð The following window opens.
9007217492118283
2. From the drop-down list[1], select the communication type.
3. Activate the selected communication type[2].
4. To edit the settings of the selected communication type, click the button[3].
16998413/EN – 12/2016