SEW-Eurodrive MOVIPRO Ethernet/IP - Starting up Units (Online)

12
Operation with the MOVITOOLS
®
MotionStudio engineering software
Executing functions with the units
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
153
12.4.2 Starting up units (online)
Proceed as follows:
1. Switch to the network view.
2. Switch to online mode by using the icon [1].
[1]
18014399693512203
3. Select the unit you want to startup.
4. Choose the command [Startup] > [Startup] from the context menu.
ð The startup assistant is displayed.
5. Follow the instructions of the startup wizard and then load the startup data into
your unit.
16998413/EN – 12/2016