SEW-Eurodrive MOVIPRO Ethernet/IP - Function Overview of MOVIPRO SDC and MOVIPRO ADC

3
Introduction
Function overview of MOVIPRO® SDC and MOVIPRO® ADC
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
14
The following figure shows an overview of the functions and options of
MOVIPRO
®
SDC and MOVIPRO
®
ADC:
MOVIPRO
®
ADC
Common fieldbus types Parameterizable
Power ratings from
2.2 – 22 kW
Safety functions
such as STO and SS1
Brake control Motor and distance encoders
Digital inputs and outputs Suitable for asynchronous
motors and synchronous
servomotors
Parameterizable and freely programmable
via integrated MOVI-PLC
®
Extended safety functions such as
e.g. SBC (Safe Brake Control)
▪
SBus
PLUS
▪
CAN (internal/external)
▪
Ethernet service
▪
MOVISAFE
®
safety bus
▪
RS485
Additional
communication interfaces:
Energy-efficient due to
optional connection of
energy management components
MOVIPRO
®
SDC
Functions
18014403449747467
16998413/EN – 12/2016