SEW-Eurodrive MOVIPRO Ethernet/IP - MOVIPRO ADC as Programmable Device

13
Parameter setting
Parameterizing the communication and control unit "PFH-..."
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
181
No. Description
[3] If you enter a name in this edit box, it will be listed in the report.
[4] This group displays the following information on the CCU application module
that is installed offline on your PC and online on the device:
• Part number
• Design
• Release
[5] Use the radio buttons to choose if you want to download the configuration with
or without controller software.
[6] Use these radio buttons to choose if you want to load the modified or complete
configuration to the SD memory card of the device.
[7] Load the configuration onto the SD memory card of the device with this button.
3. Compare the online and offline data of the CCU application module to each other
in group [4]. If the data deviate from each other, load them from your PC to the
device.
4. In the group [5], select the "Download with controller software" radio button.
ð The Application Configurator replaces the previous controller software with the
new controller software upon downloading (software update).
ð The software update can take several minutes. In order to shorten the process,
use the local engineering interface (Ethernet or USB).
5. Click the button [7].
ð The configuration data of all axes is transferred to the SD memory card of the
device.
ð The device is restarted to process the new configuration data after the down-
load.
ð The initial screen is displayed if the download and the device restart have been
successful.
For detailed information, refer to the "Application Configurator for CCU" manual.
13.4.3 MOVIPRO
®
ADC as programmable device (MOVI‑PLC
®
)
INFORMATION
Only one MOVIPRO
®
ADC with an SD memory card OMH_T. can be freely pro-
grammed.
SEW‑EURODRIVE provides libraries for the freely programmable MOVIPRO
®
ADC:
• PFH_P1D1_1_A (PROFIBUS, DeviceNet™)
• PFH_E2E3_1_A (PROFINET, EtherNet/IP™, Modbus/TCP)
INFORMATION
You find the latest versions of the libraries at the SEW website → www.sew-
eurodrive.com via "Online support">"Data&documents">"Software."
16998413/EN – 12/2016