SEW-Eurodrive MOVIPRO Ethernet/IP - Configuring Hardware (Control Structure)

8
Configuration and startup of Modbus/TCP
Configuration of the Modbus/TCP master
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
91
8.2.1 Configuring hardware (control structure)
Proceed as follows:
1. Start PL7PRO and enter the PLC type.
2. Enter the hardware configuration of the PLC in the application browser under
"STATION" >"Configuration">"Hardware Configuration".
18014400140458891
16998413/EN – 12/2016