SEW-Eurodrive MOVIPRO Ethernet/IP - 12.3 Communication via Ethernet

12
Operation with the MOVITOOLS
®
MotionStudio engineering software
Communication via Ethernet
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
144
3. Select the tool for configuring the device (in this example the command [Startup] >
[Parameter tree]).
9007201701096203
12.3 Communication via Ethernet
12.3.1 Connecting the device with the PC via Ethernet
The following figure shows the network with direct communication using Ethernet:
[1]
EURODRIVEEURODRIVE
[4]
[3]
[2]
ETHERNET
1193501835
[1] Engineering PC with Ethernet interface
[2] Ethernet connection
[3] Switch
[4] Devices (examples) with Ethernet interfaces
16998413/EN – 12/2016