SEW-Eurodrive MOVIPRO Ethernet/IP - Page 149

12
Operation with the MOVITOOLS
®
MotionStudio engineering software
Communication via Ethernet
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
149
1. Establish the communication channel via Ethernet(→2140).
2. Set the SMLP protocol parameters in the following window in the "SMLP settings"
tab[1](→2150).
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
18328429835
[1] "SMLP settings" tab [5] "IP addresses of SMLP server" tab
[2] Timeout [6] "Excluded IP addresses" tab
[3] Broadcast IP address [7] Add IP address
[4] Broadcast scan duration [8] IP address edit box
16998413/EN – 12/2016