SEW-Eurodrive MOVIPRO Ethernet/IP - Page 168

13
Parameter setting
Parameterizing the power section "PFA-..."
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
168
Completing the encoder startup
Proceed as follows:
• Complete the encoder startup.
9007201326595083
Setting Description
Load into the device (PC
→target system)
Transfers the encoder data to the device.
Download and motor startup Transfers the encoder data to the device and starts
the motor startup.
16998413/EN – 12/2016