13
Parameter setting
Storing device data
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
184
9007204387282699
5132541707
No. Description
[1] Enabling this check box permits data backup via PLC.
[2] Enabling this check box ensures that the data is backed up automatically when
a device replacement is detected.
If the check box is not activated during upload, the data can only be restored
manually via "Download".
[3] Load the data onto the SD memory card with this button.
[4] With this check box, you ensure that the data of the power section "PFA-..." is
automatically uploaded to the SD memory card after a certain period of time,
and thereby backed up.
4. To carry out the data backup to the SD memory card, click on the button [3].
16998413/EN – 12/2016
To Next Page
Loading...
