24
1
BEFORE WEIGHING
Choosing the Installation Site
The measuring performance of the balance is greatly inuenced by the environment where it is
installed.
Observe the following points to ensure safe and accurate weighing.
! Caution
Prohibitions
Do not use the balance anywhere
exposed to explosive, combustible
or corrosive gases.
This could cause re or trouble.
Instructions
Use the correct power supply and voltage with the balance.
Using an incorrect power supply or voltage with the balance will lead to re or trouble
with the balance.
Note also that if the power supply or voltage is unstable or if the power supply capacity
is insufcient, it will not be possible to obtain satisfactory performance from the
balance.
Precautions on Use
Prohibitions
Avoid locations where the balance will be exposed to any of the
following.
Air ow from an air conditioner,
ventilator, door or window
•
Installation
To Next Page
Loading...
